
By the 3rdPlanett Team | Jaipur, Rajasthan
Plywood sits behind almost every part of a finished interior: kitchen cabinets, wardrobes, beds, TV units, false ceilings and partitions. It is also one of the easiest materials to get wrong. Two sheets can look identical on the shop floor and perform very differently after a few years.
This guide explains the main types of plywood, where each one belongs in your home, and what to check before you pay.
Why plywood choice matters
When you buy the wrong grade, you rarely notice it on day one. The problems show up later: swollen edges in a kitchen, doors that sag, panels that peel or warp, or screws that no longer hold. Replacing plywood after the interior is finished is expensive and messy, so it is worth getting the choice right at the start.
The main types of plywood
1. Commercial plywood (interior grade)
The most common and most affordable type. It is suitable for dry interior areas where it will not meet water or high humidity, such as wardrobes, bedroom furniture and TV units.
2. MR grade (moisture resistant)
Made with a glue that resists humidity better than basic commercial plywood. It suits interiors in humid conditions but is not meant for direct contact with water.
3. BWR grade (boiling water resistant)
Built with a more water-resistant glue, which makes it a common choice for kitchens, bathroom cabinets and other areas with regular moisture or steam.
4. BWP / marine grade (boiling waterproof)
The highest water-resistance category. It is used where there is serious exposure to water, such as under-sink areas, outdoor-facing furniture and wet zones.
If you are unsure, ask the dealer which Indian Standard the board conforms to, and ask for the brand’s own specification sheet.
Which plywood for which room?
Area | Suggested type |
|---|---|
Bedroom wardrobes, beds, TV units | Commercial or MR grade |
Living room furniture | Commercial or MR grade |
Kitchen cabinets | BWR grade or better |
Under-sink and wet areas | BWP / marine grade |
Bathroom vanities | BWR or BWP grade |
Balcony and outdoor-facing units | BWP / marine grade |
These are general guidelines. Always confirm with your carpenter or designer, and with the manufacturer’s recommendations for your exact product.
Choosing the right thickness
Thickness depends on what the board does:
6 mm: back panels and light lining
12 mm: shutters, drawer boxes and light shelves
18 mm: carcasses, shelves under load, beds and structural panels
Using a board that is too thin for the job is a common reason for sagging shelves and loose hinges.
What to check before you buy
Brand and grade: Confirm both on the product, not just in the quote.
Thickness: Measure it yourself or ask for confirmation, because boards can fall slightly short of the stated figure.
Surface and edges: Look for cracks, gaps, patches and damaged corners.
Layers and core: Check that the layers are evenly bonded and the edge looks uniform, without large voids.
Flatness: Stand the sheet up and look along it for bends or warping.
Bill and warranty: Keep the invoice, and note any warranty terms from the brand.
Common mistakes to avoid
Using interior-grade boards in the kitchen because they were cheaper
Choosing only by price, without checking brand and grade
Ordering the exact quantity with no allowance for cutting waste
Storing sheets flat on damp floors or leaning them in the sun on site
Forgetting matching hardware, such as hinges, channels and edge band, which also affects how long the furniture lasts
Handling and storage on site
After delivery, store plywood flat, off the ground, in a dry and covered area. Keep it away from direct sun and standing water until the carpenter is ready to use it.
Buying plywood the easier way
Visiting several shops to compare grades, thicknesses and prices takes time. With 3rdPlanett, you can browse plywood and boards from verified local vendors, see live local pricing upfront, order in a few taps and track your delivery. And because we cover ten-plus categories, you can order the matching hardware, adhesives and fittings in the same place.
Final thoughts
Good interiors start with the right base material. Match the plywood grade to the room, pick the right thickness for the job, and check brand and specifications before you pay.
Ready to order? Visit 3rdplanett.com and get your plywood and boards delivered in about an hour.
Related Articles
More in-depth stories from our collection

The Chaos Tax: Why Jaipur Renovations Cost 15% More
Every renovation in Jaipur carries a hidden bill that never shows up on a quotation. We call it the Chaos Tax and most homeowners lose about 15% of their...

Home Renovation in Jaipur: 7 Smart Ways to Avoid Material Delays and Overspending
By the 3rdPlanett Team | Jaipur Rajasthan Renovating a home is exciting until the work stops. The tiles are fixed the carpenter has arrived and then someone...

Interior & Finishing Materials Delivered in 1 Hour: Meet 3rdPlanett, Jaipur’s Hyperlocal Building Materials Platform
By the 3rdPlanett Team | Jaipur Rajasthan Anyone who has renovated a home or fitted out a shop in India knows the story. You need plywood from one shop...